![]() now enter ifconfig eth0, you should get a output like this:.connect a ethernet cable to the WAN Port (its the the port on the left side, right alongside the serial port on the APU2), connect the other side of the cable to your LAN network.If the openwrt ascii logo doesn’t appear, just press enter one time and it should be visible Wait until the device is booted, this can take up to 3 minutes (most time it’s faster) it should look something like this:.Now press 1 (the key 1 on your keyboard) to boot from the USB Stick. ![]() be ready to press the F10 key as soon as you see Press F10 key now for boot menu.Plug in the power to the APU2 and watch the terminal.prepare a usb stick with openwrt to boot.Open a terminal and connect with these settings: 115200 8N1.Connect the null-modem (serial) cable to the APU2.It would be much easier to just boot openwrt from the usb stick (without installing it) This is a howto install openwrt on a internal mini PCIe SSD of the APU2. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |